Shap3d18.dat, 18th 'shape' file for CPO3D
A torus, and the program for generating it.
Superseded in Oct 2012 by shap3d34, which uses the option for users equations.
The electrodes of this torus have been generated by the command 'torus1'
after these data has been put in the file tempin.dat:
0. 0. 0. ! =x,y,z of centre of torus
0. 0. 1. ! =another point on axis
1. 0.25 ! =large and small radii
0.707 0.707 0. ! =vector for 1st end
-0.707 0.707 0. ! =vector for 2nd end
120 0 ! =subdivision numbers along and around axis
1 ! =voltage number
1 ! = colour number
1 ! put 1 if you want to exclude x < 0
1 ! put 1 if you want to exclude y < 0
0 ! put 1 if you want to exclude z < 0
a ! put a,i,o for all parts, inner half only, outer half only
0 ! put 0 for non-dielectric
The contents of the output file 'tempout.dat' were then spliced into the
present data file.
The compiled exe file 'torus1' is supplied with the CPO3D package,
together with the original code in 'torus1.f90'.
A more recent program, torus2, can also be used.
For further information click on 'torus' in Help.